Autronica AutroFlame X33AF Especificaciones descargar pdf (Pagina 7)

Description

Installation Handbook, AutroFlame X33AF PL Multispectrum IR Flame Detector, 116-P-X33AF/PL/DE, 2005-12-12,

Autronica Fire and Security AS

Page 5

2.1 LED

A tricolor LED on the detector faceplate indicates normal, fire alarm

and fault conditions. Table 2 indicates the condition of the LED for

each detector status.

Detector Status LED indicator

Power On/Normal Operation

(No fault or fire alarm)

Green

Fault Amber

Fire (Alarm) Red

Medium Sensitivity

Two Amber Flashes

During Power-up

Very High Sensitivity

Four Amber Flashes

During Power-up

2.2 Optical Integrity (Oi)

2.2.1 Automatic Oi

The X33AF PL includes the Automatic Optical Integrity (oi) feature - a

calibrated performance test that is automatically performed once per

minute to verify complete detector operation capabilities. No testing

with an external test lamp is required. The detector automatically

performs the same test that a maintenance person with a test lamp

would perform - once every minute, 60 times per hour. A successful

automatic of test does not produce an alarm condition.

The X33AF PL signals a fault condition when less than 50% of the

detection range remains. This is indicated by the yellow colour of the

LED on the face of the detector. See the “Troubleshooting” section for

further information.

1 2 3 4 5 6 7 8 9 10 11 12 ... 37 38

Sin comentarios

Autronica AutroFlame X33AF Especificaciones Pagina 7